An upgraded version of our Saber® Primary cleaner, the SCM features a reinforced frame and a channel-mount design for faster blade replacement from either side of the conveyor.

Arch Saber® Secondary (GSS) cleaners, like Saber® Primary cleaners, use a super-premium polyurethane blade that handles carryback along the return side of the belt. Its cantilever design maintains optimum cleaning pressure while letting mechanical splices pass harmlessly, saving the blade, belt, and splice from damage.

Utilizing a cam action, the Cam-A-Lot Clamp System makes quick work of changing skirtboard rubber.  360 degree rotating clamp heads allow for a custom fit in an otherwise unusable space.  Simple and easy weld on installation makes the Cam-A-Lot a hassle free solution to load zone sealing.

The Tri-Return Training Idler uses a patented convex arrangement of three self-adjusting idler rolls on a center pivot that automatically centers your conveyor belt. The center roll is horizontal and the two outer rolls are mounted at a descending angle. This roll arrangement allows the trainer to fit the full cup of the return conveyor belt.

Constructed with more steel than most impact beds, Simplicity Impact Systems provide 75 percent more belt support than conventional impact beds.  The impact bars rely on the strength and durability of steel to handle heavy, bulky material, just like the frame.  The steel sub-frames in the bars are molded into a shock absorbing rubber and capped with low-friction UHMW, giving your belts a smooth ride out of the loading zone.

The cluster spray heads are equipped with the standard #3 nozzle. The number of nozzles depends upon the spray head required. A filter and ball valve may be added to the spray bar or head.  Pumps are equipped with one filter, one ball valve, a pressure regulation valve, and pressure gauge.  Motors are available in 120/240 or 230/460 voltage.

The Archweigh Dual SC offers a weight accuracy of 1 1% – 2% as it self-adjusts to the movement of the belt, thanks to Arch’s patented dual-ended load cells.  This unique engineering compensates for outside forces on the belt by forcing converse reactions by the load cells; one is forced up while the other pushes down.  (Constant recalibration is never necessary)

The cluster spray heads are equipped with the standard #3 nozzle. The number of nozzles depends upon the spray head required. A filter and ball valve may be added to the spray bar or head.  Pumps are equipped with one filter, one ball valve, a pressure regulation valve, and pressure gauge.  Motors are available in 120/240 or 230/460 voltage.